PRODUCTSHIRESERVICESBLOG ABOUT US CONTACT US
Chain and Rope Ireland hire out a wide range of material lifting equipment. Lifting equipment such as material lifts. The lifts that we are currently hiring out is gas operated lifts, scissor lifts, manhole lifters, panel lifters, and a lifting bar.
Gas operated lifts, These lightweight lifts are operated by vapourised CO2. Set up for use in seconds, they are ideal for duct installation and similar tasks.
The scissors lift, A motorized vehicle with a railed platform that can be raised straight up is known as a scissor lift. Criss-crossing metal supports that elongate as the platform is raised are the basic feature of scissor lifts that distinguishes them visually from other equipment used to work in higher elevations.
The Manhole Lifting System permits a lone worker, male or female, to lift heavy manhole, drain and access covers, quickly and safely. ...Manhole lifters are inherently safer than most manhole lifting systems.
The Panel Lifter is made from an all welded steel construction and can be used by one person. It is controlled by a simple ratchet clutch and cable system. There is a safety latch plus an automatic pawl in the clutch to prevent inadvertent lowering of the board. The tilting cradle brings the loading height down to a manageable 1m. It is then raised using the winch to the required height. It enables plasterboard sheet to be positioned on walls and sloped or level ceilings. The Lifter has a maximum lifting height of 3.35m(11') and can hold up to a 1,200 x 4,800mm (4' x 16') single sheet (max weight 40kg). Mounted on three castors with a 1m splay for stability, it is highly maneuverable. The Lifter is quick to assemble and disassemble using no tools, making it easy to transport from job to job. Full instructions are included. We recommend this is only used for positioning single sheets of plasterboard prior to fixing.
These versatile light weight spreader beams are manufactured in Finland and are of exceptional quality. They are unique in that they automatically adjust to suit the size of the load being lifted. Their aluminium telescopic design means they are extremely light weight with the 5tonne model weighing only 35kg and capable of spanning up to 4m.
These Sprader beams have a lifting capacity from 5 Tonne to 50 Tonne and have operating widths from 2.54m to 9.6M depending on the model. The AlueX adjustable spreader beam is seen in the industry as a huge cost saving device because once the correct beam is chosen it has the ability to cover a huge variety of lifting applications without modification.
For truck mounted crane operators in particular the 10t model and the 10t+ model are extremely popular as they have the width to lift any number of loads, weigh no more than 45kg and can travel with the load as the fold down to 2.5m. This eliminates the need for a second vehicle carrying bulky spreader beams.
For further enquiries, feel free to contact our contact page or call us on (01) 457 0021